Ensure you have read the operating manual before use and follow all safety instructions

> How to correctly position my high-pressure cleaner
Kranle pump and transmission components operate significantly longer when operated in the correct position.

> If your machine has two wheels; it should not be stood up-right to operate, but laying down.
> If your machine has no wheels, or four wheels; use it in the natural standing position.

- Moving parts are better lubricated when in the horizontal position.
- There is less risk of damage if 'knocked' over.

> Location set-up of my high-pressure cleaner
Neither set-up nor operate a high-pressure cleaner in an area or room where there is a risk of fire or explosion. Do not place the machine in water, or where it may get heavy spray-back nor try to operate it under water.

In case of increased humidity and temperature fluctuations the development of condensation with the oil is possible; a little discolouration is acceptable - if the oil is thick and dark grey : an oil change is advisable.

> Electric supply..

All Kranzle high-pressure cleaners are built with powerful induction motors, ensuring you have the right set-up is vital and helps prolong the working life of electrical components.

> Water supply..
It is simple to avoid cavitation, possible damage caused by insufficient water supply, by ensuring you have sufficient water and by using correct water fittings, hoses, etc. Learn how to protect your machine.


> Never direct the water jet at the machine itself!
> Never direct the water jet at power sockets or any other electrical installations!
> Accessories in particular, hoses, trigger guns, lances, etc, are safety components!

   Components which are not approved by Kranzle render any guarantee.